Hopp til hovedinnholdet

Publikasjoner

NIBIOs ansatte publiserer flere hundre vitenskapelige artikler og forskningsrapporter hvert år. Her finner du referanser og lenker til publikasjoner og andre forsknings- og formidlingsaktiviteter. Samlingen oppdateres løpende med både nytt og historisk materiale. For mer informasjon om NIBIOs publikasjoner, besøk NIBIOs bibliotek.

2023

Til dokument

Sammendrag

The ideal conditions for anaerobic digestion experiments with biochar addition are challenging to thoroughly study due to different experimental purposes. Therefore, three tree-based machine learning models were developed to depict the intricate connection between biochar properties and anaerobic digestion. For the methane yield and maximum methane production rate, the gradient boosting decision tree produced R2 values of 0.84 and 0.69, respectively. According to feature analysis, digestion time and particle size had a substantial impact on the methane yield and production rate, respectively. When particle sizes were in the range of 0.3–0.5 mm and the specific surface area was approximately 290 m2/g, corresponding to a range of O content (>31%) and biochar addition (>20 g/L), the maximum promotion of methane yield and maximum methane production rate were attained. Therefore, this study presents new insights into the effects of biochar on anaerobic digestion through tree-based machine learning.

Til dokument

Sammendrag

Questions Field-based ecosystem mapping is prone to observer bias, typically resulting in a mismatch between maps made by different mappers, that is, inconsistency. Experimental studies testing the influence of site, mapping scale, and differences in experience level on inconsistency in field-based ecosystem mapping are lacking. Here, we study how inconsistencies in field-based ecosystem maps depend on these factors. Location Iškoras and Guollemuorsuolu, northeastern Norway, and Landsvik and Lygra, western Norway. Methods In a balanced experiment, four sites were field-mapped wall-to-wall to scales 1:5000 and 1:20,000 by 12 mappers, representing three experience levels. Thematic inconsistency was calculated by overlay analysis of map pairs from the same site, mapped to the same scale. We tested for significant differences between sites, scales, and experience-level groups. Principal components analysis was used in an analysis of additional map inconsistencies and their relationships with site, scale and differences in experience level and time consumption were analysed with redundancy analysis. Results On average, thematic inconsistency was 51%. The most important predictor for thematic inconsistency, and for all map inconsistencies, was site. Scale and its interaction with site predicted map inconsistencies, but only the latter were important for thematic inconsistency. The only experience-level group that differed significantly from the mean thematic inconsistency was that of the most experienced mappers, with nine percentage points. Experience had no significant effect on map inconsistency as a whole. Conclusion Thematic inconsistency was high for all but the dominant thematic units, with potentially adverse consequences for mapping ecosystems that are fragmented or have low coverage. Interactions between site and mapping system properties are considered the main reasons why no relationships between scale and thematic inconsistency were observed. More controlled experiments are needed to quantify the effect of other factors on inconsistency in field-based mapping.

Til dokument

Sammendrag

Modifying natural polymers with silicones gives new possibilities for packaging products and waste management. In this study, the innovative papers produced were altered following the reaction of polysaccharides and organosilicon compounds. The susceptibility of the studied material to biodegradation caused by a brown-rot fungus was assessed. Strength properties by tensile strength and dynamic mechanical analysis and hydrophobic properties by water uptake test and water contact angle analysis were evaluated. Moreover, elemental analysis by ICP method was controlled. The durability against fungi and the hydrophobic properties were increased by the modification. The fungal decay resistance of the silanized paper was reduced by water storage, which allows for managing paper waste. Cellulose-based paper treated with starch-modified methyltrimethoxysilane showed potential as a packaging material due to its reduced water uptake. Possible application areas could be corrugated boxes, cellulose thermoformed products for electronics, and food packaging. However, the water-repellent effect is limited to short-term exposure in humid conditions.