Publikasjoner
NIBIOs ansatte publiserer flere hundre vitenskapelige artikler og forskningsrapporter hvert år. Her finner du referanser og lenker til publikasjoner og andre forsknings- og formidlingsaktiviteter. Samlingen oppdateres løpende med både nytt og historisk materiale. For mer informasjon om NIBIOs publikasjoner, besøk NIBIOs bibliotek.
2011
Sammendrag
The objective of the study was to assess the influence of wood properties on copper leaching from wood treated with preservatives. Scots pine (Pinus sylvestris L.) trees were harvested from two different stands in Norway and one in Denmark. Sapwood was cut to samples (20 x 20 x 50 mm) in as many layers as the radial size allowed. Within this material, it is possible to trace the individual sample to its original position in the stem. Approximately half of the samples were treated with Wolmanit CX-8 and half with Tanalith. All samples were conditioned, impregnated with preservatives and leached according to EN84. Copper and boron content in water samples was determined by an ICP (Inductively Coupled Plasma) technique. The variation in leachability within trees, between trees and between different stands was studied. Statistical analyses showed that trees from the south are more prone to leaching and that samples from the lowest part of the tree fixate less preservative than those from the upper parts. In addition, drying method of the sample had an influence and differences were also noted between products used in the study.
Sammendrag
The aim of this study is to see if the raw material influences fixation and leachability of wood preservatives. Moving towards more eco-friendly and –concious society, the wood industries must adjust itself to new rules and regulations. Greener solutions in wood protection are being tested and introduced, older systems are being improved, but questions still arise concerning some elements currently used in wood preservation. Preservatives leaching into the nature is a problem, especially agents that consist copper. Studies have been conducted on the raw material`s influence on impregnability and variations in sapwood penetration have been found. This gives reason to believe that the leaching of wood preservatives is also influenced by the raw material. This study tries to set the variation of leachability of Wolmanit CX-8 and Tanalith into a system, evaluating the origin of a tree and the origin of a sample. The study uses Scots pine (Pinus sylvestris) as a raw material. Material was harvested from different stands in Norway and Denmark. Pine`s sapwood was cut into samples in size of 20x20x50mm. The samples were treated with the wood protection agents Wolmanit CX-8 and Tanalith. The variation in leachability within trees, between trees and between different stands was studied. Within this material, it is possible to trace the individual sample to its original position in the stem. Samples were climatized, impregnated with preservatives and leached according to standard EN84. Copper and boron content in water samples was determined by an ICP (Inductively Coupled Plasma) technique. Comparing leaching results with different variables, correlation was found with latitude and vertical position of the sample, indicating that southern stands leach out more preservative. The lowest part of the tree does not fixate preservatives.
Sammendrag
Coated wooden claddings in building facades are widely used in the Scandinavian countries, and are often preferred to other materials. Wood is facing increasing competition from other materials that are less labor intensive at the construction site and materials with less demand for maintenance thru service life, and makes further development of wooden claddings essential. Growth of discoloring moulds on exposed coated wooden claddings is mainly of aesthetic concern, and is especially disfiguring for light-colored surfaces. Growth of surface fungi often initiates repeated cleaning and shorter maintenance intervals, which in turn increase the total cost of ownership for wooden claddings. Cost and effort of ownership are often important factors considered when choosing a product, and the traditionally good market situation for wooden claddings is therefore threatened. The development of real-time PCR (polymerase chain reaction) and taxon-specific primers has provided new possibilities for specific detection and quantification of fungi in their natural substrates. In qPCR (quantitative real-time PCR), the accumulation of the PCR product is detected for each amplification cycle. An efficient and reproducible sampling and extraction of DNA is required for a high-throughput qPCR based quantification of discoloring fungi. The authors have now adjusted DNA isolation protocols and optimized real-time PCR assays for species specific detection of fungi frequently found on painted surfaces (Aureobasidium pullulans, Alternaria alternata, Cladosporium cladosporides, Ulocladium atrum).
Sammendrag
Several studies have been conducted on impregnability of the raw material and large variations have been found. The leaching of wood preservatives into nature is a problem, especially agents that consist copper. Leachability of i. e. copper has been studied by several authors. This study tries to set the variation of leachability of Wolmanit CX-8 and Tanalith in system, evaluating the origin of a tree and the origin of a sample. Samples of Scots pine sapwood (Pinus Sylvestris) (20×20×50 mm) were treated with the wood protection agents Wolmanit CX-8 and Tanalith. The variation in leachability within trees, between trees and between different stands of Scots pine (in Norway and Denmark) was studied. The samples were climatized, impregnated with preservatives and leached according to standard EN84. The study indicates differences between the products. Stand location and samples position in a tree play a role in preservative leaching from wood, favouring southern located trees to be more prone to loosing preservative. Also the lowest part of the tree does not fixate preservatives as well as the upper parts.
Sammendrag
In this study, natural polymers were tested as possible alternatives for conventional wood preservative in a two-step process. Scots pine sapwood blocks were impregnated with chitosan, tannin, propiconazole and Wolmanit and oil-treated afterwards with a modified linseed oil. Two different fixation parameters were performed. The treated samples were leached according to EN84. The outcome of trials shows that a two-step process reduces the leaching of the main active components. After leaching, the samples were exposed to fungal attack by Coniophora puteana and Trametes versicolor according to EN113. Mycological tests showed that most of oil treated samples were effective against wood decay.
Sammendrag
This paper focuses on the improvement of a combined impregnation process (CIP, also known as the Royal process). This treatment combines the protective properties of a wood protection agent and the hydrophobic properties of a subsequent oil treatment in a wood product. Copper-based wood preservatives, which are traditionally used in CIP, are very effective but their long-term future use is questionable because of environmental concerns, especially the toxicity against water-living organisms. There is a need for new environmentally friendly wood preservative systems for a use in CIP. The substitutes for copper used in this study are natural polymers and organic biocides. The aim of this research is to describe the fixation effectiveness of the following compounds: Chitosan, Propiconazole, Wolmanit CX-8, Tannin, fire protection agent, Alginate. The scots pine sapwood samples (50´25´15) mm were impregnated and oil treated. The treated products were analysed for their preservative-and oil-retention. Preservative fixation time influence on oil treatment was tested. The treated samples were leached according to EN84. Water samples were analyzed for the amount of active ingredient.
Sammendrag
Det er ikke registrert sammendrag
Sammendrag
Det er ikke registrert sammendrag
Sammendrag
Development of surface moulds and staining fungi on painted spruce panels with known origin and wood properties was investigated over a period of 4 years. Materials of Norway spruce (Picea abies) were sampled from two sites with high-productive forest on lowland in South-eastern Norway and two low-productive sites at higher altitudes and somewhat farther north. Claddings were processed from inner centreboards (mainly heartwood) and outer centerboards of both butt logs and second logs. A sub-sample of radially sawn claddings was compared with corresponding tangentially sawn claddings. Heartwood proportion, density, annual ring width, knot diameters and knot area were measured. All panels were coated with the same water-borne alkyd modified acrylic paint system. Most of the tangentially sawn claddings were coated on the side facing pith, but a sub-sample was coated on the opposite side for comparison. The specimens were exposed with 45˚ angle of inclination facing south in a field trial in Oslo from 2007 to 2011, and mould growth was evaluated visually according to EN 927-3. 7.7% of the specimens were rated as 2, 71.4% were rated as 3, 19.4% were rated as 4, and 1.5% were rated as 5. Outer boards were rated significantly higher than inner boards, while differences between origins were not significant. There was a tendency of decreased rating with increasing heartwood proportion, but the relationship was not significant. Nor was there any significant effect of annual ring with, density or knot properties. Neither the difference between radially and tangentially sawn claddings, nor the difference between specimens coated on the side facing pith was significant.
Sammendrag
Wood used in outside applications is susceptible to weathering and photo degradation, which often leads to surface discoloration, loss of brightness and surface deterioration. Research has shown that acetylated wood is more resistant against brown rot, white rot and soft rot, and more dimensionally stable than untreated wood. However, acetylated wood seems still to be disfigured by surface moulds and staining fungi. Samples of acetylated Southern Yellow pine at three different treatment levels; low, intermediate and high acetyl content were exposed at two test sites, Ås (Norway) and Bogesund (Sweden) against north and south from September 2010 until March/May 2011. Considerably more precipitation was recorded in Ås in the initial potential fungal growth phase than in Bogesund. As expected, untreated wood had higher mould ratings than acetylated wood. At Ås the tendency was that samples with low acetyl content had lower mould ratings than samples with higher acetyl content. This effect was not found in Bogesund. This may be due to considerably less precipitation in Bogesund compared to Ås. At Ås samples exposed against north tended to have higher mould ratings than panels exposed against south which could be due by less direct sun causing longer time of wetness and more ideal conditions for mould growth.