Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2017
Authors
Lise Dalsgaard Aaron Smith Ryan Bright Gunnhild Søgaard Gry Alfredsen Signe Kynding Borgen Johannes BreidenbachAbstract
No abstract has been registered
2016
Abstract
No abstract has been registered
Abstract
Wood protection against fungal decay is mainly based on chemical protection. Nontoxic protection methods have become more important in Europe due to environmental concerns. A method using electric fields to inhibit wood decay by fungi has been investigated in laboratory trials and wood mass loss and moisture content after exposure to fungal attack were determined. The results show significantly reduced mass loss for wood samples exposed to a low pulsed electric field (LPEF), while wood samples connected to alternating and direct current displayed higher mass loss compared to LPEF. Changing the electrode material reduced the mass increase due to metal ion transfer into the wood samples for LPEF-exposed samples. The use of conductive polymer instead of metal electrodes and carbon fibers was preferable as no ions were transferred and the integrity of the material persisted. Decay of pre-exposed wood samples to white rot could be stopped or slowed down by means of LPEF.
Abstract
There is an increasing awareness of how the aesthetical performance of wood exposed outdoors changes over time and especially in the first few years after installation. Mould and blue stain fungi are biological agents that contribute to the weather grey colour on a wooden façade, and the blue stain fungi Aureobasidium pullulans is commonly identified as colonizer on coated and uncoated wood exposed outdoors. In this study 21 wood substrates (untreated, preservative treated and modified) were tested for their susceptibility to A. pullulans when incubated at three different temperatures (11, 16 and 22°C). Western red cedar and preservative treated wood had the lowest mould ratings at the end of the test period (84 days). Alder, ash, Norway spruce and Sitka spruce reached maximum rating already at day 28, and at day 84 also aspen, European larch, thermally modified pine, birch, acetylated pine and DMDHEU modified pine had reached maximum rating. Incubation temperature had a significant influence on the growth of A. pullulans throughout the test period for acetylated and DMDHEU modified samples – and generally the modified wood substrates were more sensitive to changes in temperature than the other tested substrates. Scots pine sapwood seemed to be less susceptible to A. pullulans in mono cultures, demonstrating low mould ratings throughout the test period. This contradicts to previous studies were Scots pine sapwood tended to have high susceptibility when using a mix of mould and blue stain fungi.
Abstract
No abstract has been registered
Abstract
The aim of this study was to determine the efficacy of chitosan and methoxysilane in the prevention of surface mold growth on rubberwood. Three different chitosan samples were tested; C1 (Mw 37 kDa), C2 (Mw 5.4 kDa) and C3 (Mw 3.5 kDa). Radial growth inhibition assay of the chitosan samples was investigated at concentrations ranging from 0.063 to 0.5 %w/v against Aspergillus niger BAM 4 and Penicillium decumbens CBS 121928. Chitosan samples C1 and C3 exhibited strong antifungal activity against both molds. Rubberwood samples were either vacuum or dip treated with varying concentrations of chitosan or silane solution. The content of chitosan in wood showed that after the leaching test, chitosan was well retained in both vacuum and dip treated wood. The concentration of silicon in wood showed similar results. The vacuum treated wood samples with chitosan C1 and C3 at 1 %w/v concentration had strong resistance against A. niger BAM 4. However, dip treated rubberwood samples with 2 %w/v chitosan solutions showed lower resistance against A. niger BAM 4. On the other hand, both vacuum and dip treated rubberwood samples with chitosan had no resistance against P. decumbens CBS 121928. The silane treated wood samples showed no resistance to fungal growth.
Abstract
The aim of cell wall modification is to keep wood moisture content (MC) below favorable conditions for decay organisms. However, thermally modified, furfurylated, and acetylated woods partly show higher MCs than untreated wood in outdoor exposure. The open question is to which extent decay is influenced by the presence of liquid water in cell lumens. The present paper contributes to this topic and reports on physiological threshold values for wood decay fungi with respect to modified wood. In total, 4200 specimens made from acetylated, furfurylated, and thermally modified beech wood (Fagus sylvatica L.) and Scots pine sapwood (sW) (Pinus sylvestris L.) were exposed to Coniophora puteana and Trametes versicolor. Piles consisting of 50 small specimens were incubated above malt agar in Erlenmeyer flasks for 16 weeks. In general, pile upward mass loss (ML) and MC decreased. Threshold values for fungal growth and decay (ML ≥ 2%) were determined. In summary, the minimum MC for fungal decay was slightly below fiber saturation point of the majority of the untreated and differently modified materials. Surprisingly, T. versicolor was able to degrade untreated beech wood at a minimum of 15% MC, and growth was possible at 13% MC. By contrast, untreated pine sW was not decayed by C. puteana at less than 29% MC.
Abstract
No abstract has been registered
Abstract
No abstract has been registered
Authors
Anna Komasa Anna Klementyna Przybył Piotr Barczynski Izabela Ratajczak Kinga Szentner Magdalena Wozniak Pawel Kowalewski Waldemar Perdoch Grzegorz Cofta Patrycja Kwaśniewska-Sip Joanna Siuda Wojciech Grzeskowiak Krystofiak Tomasz Lone Ross Janka Dibdiakova Magdalena Broda Bartłomiej MazelaAbstract
No abstract has been registered