Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2019
Abstract
No abstract has been registered
Abstract
No abstract has been registered
Abstract
No abstract has been registered
Authors
Andreas Treu Katrin Zimmer Christian Brischke Erik Larnøy Lone Ross Foued Aloui Simon M. Cragg Per-Otto Flæte Miha Humar Mats Westin Luisa Borges John WilliamsAbstract
Timber structures in marine applications are often exposed to severe degradation conditions caused by mechanical loads and wood-degrading organisms. This paper presents the use of timber in marine environments in Europe from a wood protection perspective. It discusses the use of wood in coastline protection and archeological marine wood, reviews the marine borer taxa in European waters, and gives an overview of potential solutions for protection of timber in marine environments. Information was compiled from the most relevant literature sources with an emphasis on new wood protection methods; the need for research and potential solutions are discussed. Traditionally, timber has been extensively utilized in a variety of marine applications. Although there is a strong need for developing new protection systems for timber in marine applications, the research in this field has been scarce for many years. New attempts to protect timber used in marine environments in Europe have mainly focused on wood modification and the use of mechanical barriers to prevent colonization of marine wood borers. The importance of understanding the mechanisms of settlement, migration, boring, and digestion of the degrading organisms is key for developing effective systems for protecting timber in marine environments.
2018
Abstract
Productivity of a mechanized P. patula cut-to-length harvesting operation was estimated and modelled using two methods of data collection: manual time study and follow-up study using StanForD stem files. The objective of the study was to compare the productivity models derived using these two methods to test for equivalence. Manual time studies were completed on four different machines and their operators. Two Ponsse Bear harvesters fitted with H8 heads, and two Ponsse Beaver harvesters, fitted with H6 heads, were included. All machines were equipped with Ponsse Opti2 information system. All four operators had approximately 1 year of experience working with their respective machines. The four machines worked in separate four-tree-wide harvesting corridors, and they each harvested 200 trees. Individual tree diameter at breast height (DBH), and height measurements were made manually. Subsequently, data on the trees in each study were extracted from the StanForD stem reports from each of the harvesters. Cycle times in the stem reports were determined based on the difference between consecutive harvest timestamps. The two methods were compared in terms of their abilities to estimate equivalent measures for tree DBH, volume, and productivity. In all four cases, significant differences were found between the DBH and volume measures derived using the two methods. Subsequently, the volume measures from the manual methods were used as the basis for productivity calculations. Results of the productivity comparisons found no significant differences between the models developed from the two methods. These results suggest that equivalent productivity models can be developed in terms of time using either method, however volume discrepancies indicate a need to reconcile bark and volume functions with the high variability experienced in the country.
Abstract
Chipping of bulky biomass assortments at roadside landings is a common and costly step in the biomass-to-energy supply chain. This operation normally involves one chipping unit and one or several transport trucks working together for simultaneous chipping and chip transport to a terminal or end user. Reducing the delay factors in these operations is a relevant ambition for lowering supply costs. A method to estimate organizational delay based on: (1) the capacity ratio between the transport and the chipper, (2) the use of buffer storage, and (3) the number of transport units involved is suggested here. Other delays will also be present, and some of these may relate to the working conditions at the landing. A method to set a landing functionality index based on characteristics of the forest landing is also suggested. A total of 14 roadside chipping operations were assessed and the operators were interviewed to address the impact of machinery configuration and landing characteristics on machine utilization. At most sites, the chipper was the more productive part, and the chipper utilization was to a large extent limited by organizational delay. Still the utilization of the transport units varied between 37 and 97%, of which some 36% of the variation was explained by the landing functionality index. Knowledge from the work presented here should be a good starting point for improving biomass supply planning and supply chain configuration.
Abstract
This paper aimed to investigate the genetic structure (GS) of Scots pine in the northern area of its distribution range by means of seven neutral nuclear microsatellite markers. In particular, the postglacial recolonization of these areas and possible different adaptation patterns in distinct refugia were studied. The GS and diversity were assessed with seven pairs of neutral nuclear microsatellite primers. A high genetic diversity was found in the Scots pine material tested, along with a shallow GS. This pattern is typical for recolonized areas and species with large population sizes, which are connected by pollen-mediated gene flow. A STRUCTURE analysis found two genetic groups to be the most likely, one south-eastern and one north-western group that meet in Fennoscandia. This indicates that Scots pine recolonization of Fennoscandia might have taken place from two different directions (south-west and north-east). Scots pine that recolonized the area originated in at least two different refugia during the last glacial maximum. The glacial survival in distinct refugia can have led to different adaptation patterns and growth optima in the different groups as reflected in the formation of latewood content, where lineage was a significant influencing factor.
Abstract
Miljøpåvirkning av tre sammenlignet med andre bygningsmaterialer Den norske regjeringen har satt klare mål for å redusere forbruket av fossil energi og klimagassutslipp. Byggsektoren kan bidra for å nå disse målene ved å: Bygge energieffektive bygg; Bruke materialer med lavt forbruk av grå energi (low embodied energy materials); Bruke byggematerialer som lager for atmosfærisk karbondioksid.
Abstract
This paper presents an optimization model designed to find productivity functions for timber forwarding. Timber forwarding or skidding has for some 25 years been calculated using shortest path formulations on grid networks. Unfortunately, few productivity studies relate to such grids. Here, an inverse shortest path problem is presented, basically panning out costs on the grid based on point cost estimates. The formulation is tested using point cost estimates from the national forest inventories of Norway, together with a terrain model and other public spatial data (e.g. roads, water). The problem is optimized using the metaheuristic variable neighborhood search. The results of the test cases were achieved in reasonable time, and indicate that part of the solution space might be convex. The productivity function found for one of the test cases was used to create a variable forwarding cost map of the case area.
Authors
Kris Verheyen Martin Bažány Ewa Chećko Markéta Chudomelová Déborah Closset-Kopp Patryk Czortek Guillaume Decocq Pieter De Frenne Luc De Keersmaeker Cecilia Enriquez Garcia Martina Fabšičová John-Arvid Grytnes Lucia Hederová Radim Hédl Thilo Heinken Fride Høistad Schei Soma Horváth Bogdan Jaroszewicz Edyta Jermakowicz Terezá Klinerova Jens Kolk Martin Kopecký Iwona Kuras Jonathan Lenoir Martin Macek František Máliš Tone Constance Martinessen Tobias Naaf László Papp Ágnes Papp-Szákaly Paweł Pech Petr Petřík Jindřich Prach Kamila Reczýnska Magne Sætersdal Fabien Spicher Tibor Standovár Krzysztof Świerkosz Ewa Szczęśniak Zoltán Tóth Karol Ujházy Mariana Ujházyová Pieter Vangansbeke Ondřej Vild Dan Wołkowycki Monika Wulf Lander BaetenAbstract
Aim: Revisits of non-permanent, relocatable plots first surveyed several decades ago offer a direct way to observe vegetation change and form a unique and increasingly used source of information for global change research. Despite the important insights that can be obtained from resurveying these quasi-permanent vegetation plots, their use is prone to both observer and relocation errors. Studying the combined effects of both error types is important since they will play out together in practice and it is yet unknown to what extent observed vegetation changes are influenced by these errors. Methods: We designed a study that mimicked all steps in a resurvey study and that allowed determination of the magnitude of observer errors only vs the joint observer and relocation errors. Communities of vascular plants growing in the understorey of temperate forests were selected as study system. Ten regions in Europe were covered to explore generality across contexts and 50 observers were involved, which deliberately differed in their experience in making vegetation records. Results: The mean geographic distance between plots in the observer+relocation error data set was 24 m. The mean relative difference in species richness in the observer error and the observer+relocation data set was 15% and 21%, respectively. The mean “pseudo-turnover” between the five records at a quasi-permanent plot location was on average 0.21 and 0.35 for the observer error and observer+relocation error data sets, respectively. More detailed analyses of the compositional variation showed that the nestedness and turnover components were of equal importance in the observer data set, whereas turnover was much more important than nestedness in the observer+relocation data set. Interestingly, the differences between the observer and the observer+relocation data sets largely disappeared when looking at temporal change: both the changes in species richness and species composition over time were very similar in these data sets. Conclusions: Our results demonstrate that observer and relocation errors are nonnegligible when resurveying quasi-permanent plots. A careful interpretation of the results of resurvey studies is warranted, especially when changes are assessed based on a low number of plots. We conclude by listing measures that should be taken to maximally increase the precision and the strength of the inferences drawn from vegetation resurveys.