Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2006
Abstract
The aim of this study was to compare two methods for non-destructive strength testing of wood by the use of dynamic modulus of elasticity (MOEdyn). The two methods are based on resonant vibration excitation and ultrasonic pulse excitation. Sound Pinus sylvestris L. sapwood samples treated with two copper-containing wood preservatives and two chitosan solutions were evaluated at two moisture levels. There was a significant correlation between the measurements given by the two MOEdyn test devices. An analysis of variance showed significant differences between the different treatments and between different moisture levels. Potential use of the non-destructive MOEdyn methods in durability testing is discussed.
Abstract
There is a high correlation between methods for dynamic modulus of elasticity (MOEdyn) and static modulus of elasticity (MOEstat). MOEdyn methods have been found sensitive to detect early stages of decay and may be seen as an option for non-destructive wood durability testing.As the MOEstat measurements do not change after reaching the fibre saturation point, the uncorrected MOEdyn data from ultrasonic pulse excitation method provides increasin values after fibre saturation. This is due to the effect of free water in the cell lumen on ultrasonic waves. The aim of this study was to make a moisture calibration for the MOEdyn ultrasonic pulse excitation method using Scots pine (Pinus sylvestris L.) sapwood samples.MOE was measured at five different moisture levels. Three different MOE test methods were used: MOEdyn using ultrasound and vibration excitation and the traditional MOEstat. Sound Scots pine sapwood samples treated with two copper-containing wood preservatives and two chitosan solutions were evaluated, using untreated sapwood samples as control.In this study a correction value (\"k\") was calculated based on data from different moisture levels for water saturated samples using four different wood treatments and control. By measuring MOEdyn ultrasonic at wood moisture contents just below fibre saturation point, a minor effect of incipient water accumulation in the wood matrix was detected.Wood treatments influence the \"k\" value, and a \"k\" value needs to be calculated for all wood treatments when measuring MOEdyn ultrasound above fibre saturation. All the three MOE test methods in this study are applicable for all wood moisture levels as long as a \"k\" value is calculated for MOEdyn ultrasound above fibre saturation.
Abstract
No abstract has been registered
Authors
Michelle de Chantal Kjersti Holt Hanssen Aksel Granhus Urban Bergsten Mikaell Ottosson-Löfvenius Harald GripAbstract
No abstract has been registered
Abstract
No abstract has been registered
Abstract
According to previous studies, short day (SD) treatment may increase frost hardiness in Picea abies (L.) Karst. seedlings during shoot elongation the next year. The purpose of this study was to examine how timing of the SD treatment affects spring frost hardiness. The following four treatments were applied in the first growth period: natural photoperiod (Nat), or SD treatment (8/16 h, day/night) either from 14-28 July (SD1), 28 July-11 August (SD2), or 11 20 August (SD3). After 125 days in the cold store (October-January), the seedlings were transferred to forcing conditions (20-25oC, 24 h photoperiod) followed by freezing tests at 3, -5, -7 and 9oC when most seedlings had reached bud break stage 7 (Krutzsch index). Seedling height measurements and analyses of carbohydrate status, nitrogen concentration and dry weight of needles after cold storage were done to examine the treatments` impact on seedling quality. SD treatment reduced visual freezing injury to current- and first-year shoots. Mortality occurred at –7 and –9oC and was significantly higher in treatments Nat and SD1 (43% in both) than in the SD2 (23%) and SD3 (15%) treatments. Seedlings from the late SD treatments also showed better height growth and developed more shoots from dormant buds after freezing to –3 and –5oC. Collectively, these findings demonstrate the importance of proper timing of the SD treatment in relation to the seedlings’ natural growth rhythm.
Abstract
No abstract has been registered
Abstract
A method for quantitative determination of extractives from heartwood of Scots pine (Pinus sylvestris L.) using gas chromatography (GC) with flame ionization detection (FID) was developed. The limit of detection (LOD) was 0.03mg/g wood and the linear range (r=0.9994) was up to 10mg/g with accuracy within ±10% and precision of 18% relative standard deviation. The identification of the extractives was performed using gas chromatography combined with mass spectrometry (GC–MS). The yields of extraction by Soxhlet were tested for solid wood, small particles and fine powder. Small particles were chosen for further analysis. This treatment gave good yields of the most important extractives: pinosylvin, pinosylvin monomethyl ether, resin acids and free fatty acids. The method is used to demonstrate the variation of these extractives across stems and differences in north–south direction.
Authors
Fride Høistad ScheiAbstract
No abstract has been registered
Abstract
No abstract has been registered