Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2013
Abstract
Many remote sensing-based methods estimating forest biomass rely on allometric biomass models for field reference data. Terrestrial laser scanning (TLS) has emerged as a tool for detailed data collection in forestry applications, and the methods have been proposed to derive, e.g. tree position, diameter-at-breast-height, and stem volume from TLS data. In this study, TLS-derived features were related to destructively sampled branch biomass of Norway spruce at the single-tree level, and the results were compared to conventional allometric models with field measured diameter and height. TLS features were derived following two approaches: one voxel-based approach with a detailed analysis of the interaction between individual voxels and each laser beam. The features were derived using voxels of size 0.1, 0.2, and 0.4 m, and the effect of the voxel size was assessed. The voxel-derived features were compared to features derived from crown dimension measurements in the unified TLS point cloud data. TLS-derived variables were used in regression models, and prediction accuracies were assessed through a Monte Carlo cross-validation procedure. The model based on 0.4 m voxel data yielded the best prediction accuracy, with a root mean square error (RMSE) of 32%. The accuracy was found to decrease with an increase in voxel size, i.e. the model based on the 0.1 m voxel yielded the lowest accuracy. The model based on crown measurements had an RMSE of 34%. The accuracies of the predictions from the TLS-based models were found to be higher than from conventional allometric models, but the improvement was relatively small.
Abstract
No abstract has been registered
Abstract
No abstract has been registered
Abstract
National Forest Inventories (NFIs) provide estimates of forest parameters for national and regional scales. Many key variables of interest, such as biomass and timber volume, cannot be measured directly in the field. Instead, models are used to predict those variables from measurements of other field variables. Therefore, the uncertainty or variability of NFI estimates results not only from selecting a sample of the population but also from uncertainties in the models used to predict the variables of interest. The aim of this study was to quantify the model-related variability of Norway spruce (Picea abies [L.] Karst) biomass stock and change estimates for the Norwegian NFI. The model-related variability of the estimates stems from uncertainty in parameter estimates of biomass models as well as residual variability and was quantified using a Monte Carlo simulation technique. Uncertainties in model parameter estimates, which are often not available for published biomass models, had considerable influence on the model-related variability of biomass stock and change estimates. The assumption that the residual variability is larger than documented for the models and the correlation of within-plot model residuals influenced the model-related variability of biomass stock change estimates much more than estimates of the biomass stock. The larger influence on the stock change resulted from the large influence of harvests on the stock change, although harvests were observed rarely on the NFI sample plots in the 5-year period that was considered. In addition, the temporal correlation between model residuals due to changes in the allometry had considerable influence on the model-related variability of the biomass stock change estimate. The allometry may, however, be assumed to be rather stable over a 5-year period. Because the effects of model-related variability of the biomass stock and change estimates were much smaller than those of the sampling-related variability, efforts to increase the precision of estimates should focus on reducing the sampling variability. If the model-related variability is to be decreased, the focus should be on the tree fractions of living branches as well as stump and roots.
Abstract
No abstract has been registered
Authors
Tor Myking Erling Johan Solberg Gunnar Austrheim James David Mervyn Speed Fredrik Bøhler Rasmus Astrup Rune EriksenAbstract
Sallow (Salix caprea L.) and rowan (Sorbus aucuparia L.) constitute small proportions of the deciduous tree volume in Scandinavia, but are highly preferred winter forage for moose and red deer, which occur at historically high densities. Thus, a possible decline of these tree species has been indicated. Against this background, we have reviewed the life histories of relevance for browsing, as well as the basic biology and genetics of sallow and rowan. The species show similarities with respect to short lifespan, small size and sympodial growth pattern, which are risk factors in a browsing context. They also have high juvenile growth rate, important for growing quickly out of reach of browsers. Sallow depends strongly on disturbance for establishment and is more demanding with respect to soil and light conditions than rowan, possibly important for the substantially lower abundance of sallow on the Norwegian Forest Inventory plots. Similarly, the relative recruitment of small size classes of sallow is less than for rowan. Although recruitment is reported to be hampered in wintering areas with high moose or red deer densities, the inventory data, however, dating only back to 1994, do not suggest a general decrease in any of the species. Sallow and rowan saplings show low mortality in moose and deer dominated areas and the species can be characterised as rather resilient to browsing. Of more concern is that browsing can constrain the development of mature rowan and sallow trees locally, with possible consequences for associated epiphytic biodiversity.
Abstract
There is a need for monitoring methods for forest volume, biomass and carbon based on satellite remote sensing. In the present study we tested interferometric X-band SAR (InSAR) from the Tandem-X mission. The aim of the study was to describe how accurate volume and biomass could be estimated from InSAR height and test whether the relationships were curvilinear or not. The study area was a spruce dominated forest in southeast Norway. We selected 28 stands in which we established 192 circular sample plots of 250 m2, accurately positioned by a Differential Global Positioning System (dGPS). Plot level data on stem volume and aboveground biomass were derived from field inventory. Stem volume ranged fromzero to 596 m3/ha, and aboveground biomass up to 338 t/ha.We generated 2 Digital Surface Models (DSMs) fromInSAR processing of two co-registered, HH-polarized TanDEM-X image pairs – one ascending and one descending pair.We used a Digital TerrainModel (DTM) from airborne laser scanning (ALS) as a reference and derived a 10 m × 10 m Canopy Height Model (CHM), or InSAR height model. We assigned each plot to the nearest 10 m × 10 m InSAR height pixel. We applied a nonlinear, mixed model for the volume and biomass modeling, and from a full model we removed effects with a backward stepwise approach. InSAR heightwas proportional to volume and aboveground biomass, where a 1 m increase in InSAR height corresponded to a volume increase of 23 m3/ha and a biomass increase of 14 t/ha. Root Mean Square Error (RMSE) values were 43–44% at the plot level and 19–20% at the stand level.
2012
Abstract
No abstract has been registered
Abstract
K-nearest neighbor (kNN) approaches are popular statistical methods for predicting forest attributes in airborne laser scanning (ALS) based inventories. Their main upsides are the simplicity to predict multivariate response variables and their freeness of distributional assumptions on the conditional response.One of their largest draw-backs is that predictions outside the range of the reference data inherently result in an under- or overestimation. This property of kNN approaches is known as extrapolation bias and aggravates with an increasing number of neighbors (k) used for the prediction.This study presents one possibility to reduce extrapolation biases of predictions based on the area-based approach (ABA) by using individual tree crown (ITC) approaches within those specific areas of a low density ALS acquisition where the point density might be sufficiently high for using ITC methods.In the proposed strategy, additional (or artificial) reference plots augmented field measured plots. Artificial plots were created by applying ITC segmentation to a canopy height model derived from high density ALS data. The response variable biomass per hectare was predicted for every segment following a semi-ITC approach.The segment predictions were aggregated on the artificial plot level. The artificial plots were then treated in the same way as the original reference data to make predictions in areas with low density ALS data based on the ABA. It was hereby assumed that the predicted plot level response on the artificial plots is equivalent with the observed plot level response on the original reference data.The data consisted of 110 reference plots with a smaller data range than the 201 independent validation plots. Considerable extrapolation bias was visible if only the reference plots were used for the prediction. Almost no extrapolation bias was found if the prediction was based on reference plots augmented by artificial plots. The root mean squared error (RMSE) of the biomass predictions based on the reference plots was 39.1%. The RMSE reduced to 29.8% if the reference plots were augmented by artificial plots.
Abstract
Climate change is a factor that largely contributes to the increase of forest areas affected by natural damages. Therefore, the development of methodologies for forest monitoring and rapid assessment of affected areas is required. Space-borne synthetic aperture radar (SAR) imagery with high resolution is now available for large-scale forest mapping and forest monitoring applications. However, a correct interpretation of SAR images requires an adequate preprocessing of the data consisting of orthorectification and radiometric calibration. The resolution and quality of the digital elevation model (DEM) used as reference is crucial for this purpose. Therefore, the primary aim of this study was to analyze the influence of the DEM quality used in the preprocessing of the SAR data on the mapping accuracy of forest types. In order to examine TerraSAR-X images to map forest dominated by deciduous and coniferous trees, High Resolution SpotLight images were acquired for two study sites in southern Germany. The SAR images were preprocessed with a Shuttle Radar Topography Mission (SRTM) DEM (resolution approximately 90 m), an airborne laser scanning (ALS) digital terrain model (DTM) (5 m resolution), and an ALS digital surface model (DSM) (5 m resolution). The orthorectification of the SAR images using high resolution ALS DEMs was found to be important for the reduction of errors in pixel location and to increase the classification accuracy of forest types. SAR images preprocessed with ALS DTMs resulted in the highest classification accuracies, with kappa coefficients of 0.49 and 0.41, respectively. SAR images preprocessed with ALS DTMs resulted in greater accuracy than those preprocessed with ALS DSMs in most cases. The classification accuracy of forest types using SAR images preprocessed with the SRTM DEM was fair, with kappa coefficients of 0.23 and 0.32, respectively.Analysis of the radar backscatter indicated that sample plots dominated by coniferous trees tended to have lower scattering coefficients than plots dominated by deciduous trees. Leaf-off images were only slightly better suited for the classification than leaf-on images. The combination of leaf-off and leaf-on improved the classification accuracy considerably since the backscatter changed between seasons, especially in deciduous-dominated forest.