Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2013
Forfattere
Ger Devlin Bruce TalbotSammendrag
The Irish government has undertaken to reduce national CO2 emissions through a range of measures put out in their Biomass Action Plan and the National Renewable Energy Action Plan. The conversion of peat fired power plants to co-fire with renewable biomass is one of these. This paper considers how the adoption of sweeping policies impact on other actors presently supplying or utilizing woody biomass resources. The SAWMILL sector (18 sawmills), BOARD sector, 3 board plants, and ENERGY sector (3 peat fired power stations) were included in a Linear Programming (LP) based transportation study. Specific transport costs between each residue producing sawmill and each board and energy plant were modeled and used in finding the minimum delivered cost for a number of scenarios. Scenario 2015 represented the status quo, while Scenario 2030 represented a situation with 30% co-firing with woody biomass equivalents in the energy plants. For each time horizon, the problem was solved from the perspective of society at large (GLOBAL), for the benefit of the board sector (BOARD) or with emphasis on minimizing the cost to the energy sector (ENERGY). The cost of transporting alternative sources of renewable energy was varied between €100 and €500 TJ−1. Results showed how overall supply costs increase with increasing alternative energy cost, but also how the dynamics between sectors focus worked. The cost of transport to the Energy sector ranged from €306,043 to €996,842 in Scenario 2015, while the increased demand in 2030 led to a range of between €1,132,831 and €4,926,040, depending on the alternative cost selected. For the Board sector, whose absolute demand remained constant, the total transport cost ranged between €868,506 and €3,454,916 in Scenario 2015. The unchanged demand showed that the transport costs also remained the same for the 2030 Scenario, however, the optimization focusing on the Energy sector, increased the delivery cost to the Board sector by up to €693,730 per year by 2015 and €842,271 per year by 2030, indicating how intervention would be necessary if political ambitions of a 30% co-firing should happen without detriment to other important wood based industries.
Forfattere
Mallikarjuna Rao Kovi Åshild Ergon Petter Marum Arild Larsen Liv Østrem Odd Arne RognliSammendrag
No abstract has been registered
Sammendrag
The aim of this study was to determine whether forest clear-cuts during 2000–2011 could be detected as a decrease in surface height by combining Digital Surface Models (DSMs) from the Shuttle Radar Topography Mission (SRTM) and Tandem-X, and to evaluate the performance of this method using SRTM X- and C-band data as references representing the heights before logging. The study area was located in a Norway spruce-dominated forest estate in southeastern Norway. We interpolated 11-year DSM changes into a 10 m × 10 m raster, and averaged these changes per forest stand. Based on threshold values for DSM decreases we classified the pixels and stands into the categories “clear-cut” and “not clear-cut”, and compared this to a complete record of logged stands during 2000–2011. The classification accuracy was moderate or fairly good. A correct detection was achieved for 59%–67% of the clear-cut stands. Omission errors were most common, occurring in 33%–42% of the stands. Commission errors were found in 13%–21% of the clear-cut stands. The results obtained for X-band SRTM were only marginally better than for C-band. In conclusion, the combination of SRTM and Tandem-X has the potential of providing near global data sets for the recent 12 years’ logging, which should be particularly valuable for deforestation mapping.
Forfattere
Pedro A. Alviola IV Rodolfo M. Jr. Nayga Michael R. Thomsen Zhongyi WangSammendrag
No abstract has been registered
Forfattere
Christian Brischke Christian Welzbacher Antje Gellerich Susanne Bollmus Miha Humar Katharina Plaschkies Wolfram Scheiding Gry Alfredsen Joris Van Acker Imke De WidtSammendrag
No abstract has been registered
Sammendrag
No abstract has been registered
Sammendrag
No abstract has been registered
Forfattere
Jan Světlík Isabella Børja Sabine Rosner Jan Čermák Valeriy Nadezhdin Nadezhda NadezhdinaSammendrag
In cases where sap flow is measured in trees and cross-sectional sapwood is not uniformly distributed, as in stems of diseased trees, an additional method may refine the sap flow measurements. If the studied trees are felled, the modified differential translucence method (MDT) for quantifying sapwood distribution in cross-sectional area may be compared with sap flow measurements. We studied sap flow by the heat field deformation method (HFD) in 12 Norway spruce trees with visible dieback symptoms and 12 without symptoms. Later, all sample trees were felled and analysed by MDT method. Results from MDT described well the differences and abnormalities which were also detected by HFD at any depth of the sapwood. Sap flow for whole tree (SF1) was calculated in accordance with radial and circumferential variation of sap flow density detected by HFD (based on average sap flow radial profiles). Other sapwood disturbances in parts not covered by HFD measurements were later corrected by MDT and refined total sap flow (SF2) was calculated. Relative differences between SF1and SF2 reached an interval from -0.21 to 0.41 for symptomatic trees and from -0.15 to 0.29 for non-symptomatic trees. The majority of the non-symptomatic trees had the relative difference close to zero. The theoretical use of single-point sensors for sap flow measurement was compared with the proportions of three wood types in a line 2 cm below the vascular cambium (a-sapwood, b-borders sapwood/heartwood or embolism, c-heartwood or embolism). The variability across wood types in the chosen line in the symptomatic trees was high and therefore quantifying the sap flow by the single point method was not possible.
Forfattere
Anne-Kristin Løes Martha EbbesvikSammendrag
No abstract has been registered
Sammendrag
No abstract has been registered