Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2010
Authors
Per Gundersen Ari Laurén Lena Finér Eva Ring Harri Koivusalo Magne Sætersdal Jan-Olov Weslien Bjarni D. Sigurdsson Lars Högbom Jukka Laine Karin HansenAbstract
Riparian forests (RF) growing along streams, rivers and lakes comprise more than 2% of the forest area in the Nordic countries (considering a 10 m wide zone from the water body). They have special ecological functions in the landscape. They receive water and nutrients from the upslope areas, are important habitats for biodiversity, have large soil carbon stores, but may emit more greenhouse gases (GHG) than the uplands. In this article, we present a review of the environmental services related to water protection, terrestrial biodiversity, carbon storage and greenhouse gas dynamics provided by RF in the Nordic countries. We discuss the benefits and trade-offs when leaving the RF as a buffer against the impacts from upland forest management, in particular the impacts of clear cutting. Forest buffers are effective in protecting water quality and aquatic life, and have positive effects on terrestrial biodiversity, particularly when broader than 40 m, whereas the effect on the greenhouse gas exchange is unclear.
Authors
Signe Nybø Gregoire Certain Olav Skarpaas Jarle W. Bjerke Erik Framstad Markus Lindholm Jan-Erik Nilsen Ann Norderhaug Eivind Oug Hans Christian Pedersen Ann Kristin Schartau Ken Olaf Storaunet Gro Ingleid van der Meeren Iulie Aslaksen Steinar Engen Per Arild GarnåsjordetAbstract
No abstract has been registered
Abstract
Dormancy release as influenced by duration of outdoor winter chilling in Florence (Italy) was studied under different photoperiodic and temperature treatments in collected twigs of two European (Ulmus glabra Huds. and Ulmus minor Mill.) and four Asian (Ulmus pumila L., Ulmus parvifolia Jacq., Ulmus macrocarpa Hance and Ulmus villosa Brandis) elm clones. Photoperiod had no effect on dormancy release, and there was no evidence that photoperiod affected bud burst during quiescence in the studied elm clones. Thermal time (day degrees >0 °C) to bud burst decreased in all the clones with increasing outdoor chilling. Although all the clones exhibited a rather weak dormancy, they significantly differed from each other. Dormancy was released earlier in the Asian than in the European clones, and the clones could be ranked from the U. pumila clone (very weak and short dormancy) to the U. minor clone (relatively stronger and longer dormancy), the other clones being intermediate. In all the clones except U. minor, the observed decrement in thermal time to bud burst was efficiently explained as an inverse exponential function of the number of chill days ≤5 °C received outdoor in autumn and winter. Endodormancy, as measured by the single-node cuttings test, was weak and short in all the clones. The latter result suggests that correlative inhibitions were largely responsible for preventing bud burst during winter in these elm clones.
Abstract
The Nordic region is characterized by simple, non-bureaucratic exchange of forest genetic resources (FGR) between countries that is strongly associated with the everyman\"s right legislation within the individual countries. The regime for international exchange of FGR is smooth and regarded as being very valuable for the forestry sector across the Nordic country borders as it secures the unrestricted availability of seeds and breeding material.
Abstract
There is great ecological, economic and social value within forest genetic resources – that is a fact. But so far, the true legal status of this resource has not been defined. This was the background for a meeting held in Vienna on 13 September 2010 which assembled forest and legal experts to discuss preliminary outputs from a NordGen project (2009-2010), initiated by representatives from Denmark, Finland, Norway and Sweden....
Abstract
Development in surface mould growth on painted/unpainted wooden claddings and acting climatic factors were investigated over a period of 3 years. Eight wood substrates, including modified, preservative-treated and untreated wood, were tested in combination with three types of paint: (1) water-borne alkyd modified acrylic paint without fungicide; (2) solvent-borne alkyd paint without fungicide; and (3) ICP (internal comparison product). One set of samples was exposed unpainted. The samples were tested according to a modified version of EN 927-3. A logistic regression model was fitted to the data. The degree of mould growth varied with exposure time, coating typology, wood substrate, temperature and relative humidity. Exposure time and coating typology contributed most to the model. After 3 years of outdoor exposure unpainted panels and panels coated with solvent-borne paint without fungicide had more mould growth than panels coated with ICP and water-borne paint without fungicide. Unpainted oil/copper–organic preservative-treated claddings had higher resistance to mould growth than other unpainted wood substrates. Coated untreated pine and coated acetylated pine were more susceptible to mould growth than other coated wooden substrates.
Abstract
Microbial disfigurement of coated wooden surfaces is considered a major maintenance concern and will shorten the aesthetic service life of wooden facades. The effect of the physical surface structure of a paint film when applied on wood may have an impact on the susceptibility to mould growth. Six model paints were formulated to give the following physical surface structures: glossy, matt, soft, hard, hydrophobic, and a film with air inclusion. The model paints and a standard paint, with and without fungicide, were applied on panels of Norway spruce (Picea abies L Karst.) and exposed outdoors for nearly three years according to a modified version of EN 927-3. A logistic regression model was fit to the data, and the degree of mould growth varied with exposure time and type of paint. Hard model paint was significantly more susceptible than the other model paints and had a performance close to the standard paint without fungicide. Soft model paint provided the best performance, with the least mould growth. Temperature, relative humidity, and precipitation did not significantly contribute to the model. (C) 2010 Elsevier Ltd. All rights reserved.
Abstract
Degelia cyanoloma (Schaer.) H. H. Blom & L. Lindblom is resurrected from synonymy and elevated from varietal rank to species. The taxon was earlier referred to D. plumbea (Lightf.) P. M. Jørg. & P. James, however, several discontinuous character states distinguish the two species. Degelia cyanoloma is characterized morphologically by having a large thallus that is pale greyish when dry, lobes that are composed of consecutive trough-shaped segments with an upper surface without squamules, no isidia or soredia, and apothecia discs that are dark reddish brown to blackish. Degelia cyanoloma has a euoceanic distribution and is known from western Europe (Norway, France, Great Britain, Ireland, Portugal, Spain). Based on results from studies of morphology, we hypothesize that D. atlantica (Degel.) P. M. Jørg. & P. James is the closest relative of D. cyanoloma among the European species of the genus whereas D. plumbea is closely related to D. ligulata P. M. Jørg. & P. James.
Abstract
No abstract has been registered
Abstract
While forest inventories based on airborne laser scanning data (ALS) using the area based approach (ABA) have reached operational status, methods using the individual tree crown approach (ITC) have basically remained a research issue. One of the main obstacles for operational applications of ITC is biased results often experienced due to segmentation errors. In this article, we propose a new method, called "semi-ITC" that overcomes the main problems related to ITC by imputing ground truth data within crown segments from the nearest neighboring segment. This may be none, one, or several trees. The distances between segments were derived based on a set of explanatory variables using two nonparametric methods, i.e., most similar neighbor inference (MSN) and random forest (RF). RF favored the imputation of common observations in the data set which resulted in significant biases. Main conclusions are therefore based on MSN. The explanatory variables were calculated by means of small footprint ALS and multispectral data. When testing with empirical data the new method compared favorably to the well-known ABA. Another advantage of the new method over the ABA is that it allowed for the modeling of rare tree species. The results of predicting timber volume with the semi-ITC method were unbiased and the root mean squared error (RMSE) on plot level was smaller than the standard deviation of the observed response variables. The relative RMSEs after cross validation using semi-ITC for total volume and volume of the individual species pine, spruce, birch, and aspen on plot level were 17, 38, 40, 101, and 222%, respectively. Due to the unbiasedness of the estimation, this study is a showcase for how to use crown segments resulting from ITC algorithms in a forest inventory context. (C) 2009 Elsevier Inc. All rights reserved.